Gas Detector Calibration

gas detector calibration

as per SOLAS REGULATION XI-1/7, annual Calibration of  Portable gas detectors are a mandatory requirement.

WE OFFER CALIBRATION OF PORTABLE AND FIXED MULTI-GAS DETECTORS OF ALL MAKES AND MODELS.

  • Annual calibration of portable and fixed multi gas detector as per SOLAS Reg. XI-1/7
  • On-board calibration
  • On-board issuance of certificate
  • Gas detector service
gas detector calibration

Service ports: Brisbane, Gladstone, Newcastle, Sydney, Melbourne, Perth and Fremantle.

Contact us for gas detector calibration services in Australia

Appropriate and Calibrated Portable gas detectors are a mandatory requirement in line with SOLAS regulation XI-1/7 for all applicable vessels. At Oceanlink, we provide gas detector calibration in compliance with SOLAS regulations.

gas detector calibration

All onboard Gas measuring equipment needs to be calibrated to ensure proper detection of the following:

  • Oxygen
  • Flammable gases
  • Hydrogen Sulphide
  • Carbon monoxide

MSC.1/Circ.1477 states that “It should be noted that, given a ship’s specific characteristics and operations, additional atmospheric hazards in enclosed spaces may be present that may not be detected by the instrument recommended to be selected by these Guidelines, and in such cases, if known, additional appropriate instruments should be carried.”

Gas Detector Calibration Service

gas detector calibration

Compliant calibration of portable and fixed multi-gas detectors of all makes and models as per instrument manufacturer’s instructions.

We are available 24/7 to respond to your multi-gas detector needs.

For products, please contact +61731362500 (24 hrs hotline) or e-mail.

Oceanlink is an authorized distributor and service partner Riken Keiki  Co., LTD. in collaboration with CEPL. 

Portable gas detector calibration

Calibration of a portable gas detector is a mandatory requirement as well, as prescribed by the manufacturer of the gas detector.

A calibrated gas detector will provide a precise and accurate reading of traces of toxic and undesired gases, and provide maximum safety to the user. If the detectors are not calibrated properly, the outcome can be very dangerous.

Gas detector calibration requirements

gas detector calibration

As per SOLAS XI-1/7 regulation, Portable gas detector has to be:

  • Four gas detector
  • 10 Hours of continuous operation
  • Waterproof
  • Dustproof
  • IP67 Protection
  • Capable of remote detection 

As per Atmosphere testing instruments – SOLAS XI-1 Regulation 7 

2.5. It is recommended that each ship should also be provided with calibrated and tested multi-gas detectors suitable for measuring the level of oxygen, carbon monoxide and other gases as appropriate, during the entry, as per paragraph 8.2 and 9.3 of Resolution A.1050(27). These may be the same instrument(s) used prior to entry into the enclosed space (other than colorimetric tubes referred to in section 4) or maybe additional instruments.

All portable gas detectors available onboard need to be tested and calibrated as per manufacturer’s instructions to make sure that the devices perform satisfactorily and adhere to the requirements. 

Gas detector calibration procedure

The calibration of gas detectors is done as per the instrument manufacturer’s instructions.

Where recommended by the manufacturer, span gas, containing the correct gas mix for the instrument(s), are carried on board for the purposes of “bump testing” of the instrument.

Gas detector calibration certificate

We offer on-site/onboard calibration service at your port of call and issue certificates onboard with 1 year of validity from the date of issue.

Gas detector calibration frequency or How often should multi-gas detectors be calibrated?

Portable and Fixed gas detectors used on commercial vessels need to be calibrated Annually / every 12 Months.

Xnx Honeywell gas detector calibration

We calibrate Xnx Honeywell gas detector as per the instrument manufacturer’s instructions.

Marine Elevator Inspection and Servicing

Marine elevator service

Marine elevator inspection

Elevators and related equipment are inspected annually. Our engineers conduct thorough marine elevator inspection and servicing of all associated parts, under, on top of and inside the cab, and all related elevator operations.

All annual safety inspection of lifts and elevators onboard the vessel is carried according to ISO 8383:1985.

Upon completion of the annual inspection, we issue a certificate that is valid for a year from the date of issue.

Elevator inspection requirements

12 monthly- Annual safety inspection

5 Yearly- Load test inspection

Elevator safety annual inspection standard

  • Safety inspection of elevators on board the vessel is carried according to ISO 8383:1985.
  • Technicians are competent with recognized elevator maintenance and inspection qualifications.
  • Liability insurance.
  • Compliance to flag and class / statutory and regulatory requirements.

Marine elevator maintenance service

Beside annual inspection, our competent service engineers specialize in regular and breakdown maintenance of Marine elevator.

We are an ISO 9001:2015; ISO 14001:2015; ISO 4801:2001 and ISO 18001:2007 Certified company by DNV GL for Providing services, supplies, and inspections to the Marine and offshore industry.

Click Here For Elevator Inspection

We are an ISO 9001:2015; ISO 14001:2015; ISO 4801:2001 and ISO 18001:2007 Certified company by DNV GL for Providing services, supplies, and inspections to the Marine and offshore industry.

Contact us today at info@oceanlink.net.au for marine elevator inspection and repair services in Australia.

Load Test Inspection

Load test inspection

Load test inspection to Marine and offshore industry in Australia.

fully competent and certified to carry out annual and 5-yearly crane and lifting gear inspections and load tests as per ILO 152.

Lifeboat and Rescue boat davits

Cargo Cranes

Deck handling cranes

Engine room cranes

Provision cranes

Gangways and Accommodation Ladders

Offshore equipment

Load test inspection

Service ports: Brisbane, Gladstone, Newcastle, Sydney, Melbourne, Perth and Fremantle.

Contact us for load test inspection in Australia

OceanLink Marine Services provides on-site Load test inspection and crane services along with wide range of certified test equipment and services to carry out load test in Australia. Load testing, an important factor to determine the safety and proof testing along with certification for all types of cranes and lifting equipment based on the mandatory requirements for Marine class standards.

Contact us today for Load test inspection on deck cranes, provision crane, overhead crane, lifeboat or rescue boat davit, and gangway.

Periodic and 5-Yearly inspection

Oceanlink Marine Services offer 5-yearly crane and lifting gear inspections, load testing, the supply of water bags, and cargo gear endorsements in Australia. We are aware of the Class and Flag requirements and offer complaint solution.

We employ industry experienced engineers with expertise in troubleshooting cranes and lifting equipment.

We are fully competent and certified to carry out annual and 5-yearly crane and lifting gear inspections and load tests as per ILO 152.

Load Test
Proof load test inspection Services

We provide following load test services up to 200 Tones and test certificate for the following ship equipment.

  • Deck Crane Load test
  • Provision crane Load test inspection
  • Engine Room Overhead crane
  • Life Boat Davits
  • Rescue Boat Davits
  • Gangway Load test

Throughout our network, we can deploy our experienced Marine Engineers and all the equipment needed for just about any load testing job, anywhere in Australia.

Our inspection service includes:

  • Certification and maintenance record – review.
  • Inspection of steel structure / loose gears.
  • Inspection and function testing of drive components.
  • Checking and adjustment of electric and electronic settings.
  • Checking and adjustment of hydraulic parameters.
  • Full crane function test, ramping time & speed adjustments
  • Measuring the leak-oil amount.
  • Measuring axial clearance of slewing bearing.
  • Carry out miscellaneous repair as necessary.

Load Test Equipment Rental

We provide crane load test equipment rental, such as

  • Water Bags, range from up to 50 Ton
  • Load cell, up to 50 Ton
  • Load Shackle
  • Lifting Wires
  • Chain Blocks
  • Lever Blocks
  • And accessories.

 

Load test inspection Standards and Regulations

We adhere to the following regulations

AMSA Marine Order 32 (Cargo handling equipment) 2016

AMSA Marine order 32 prescribes matters for machinery and equipment that belong to a vessel and are used for loading or unloading the vessel, including inspection, testing, maintenance and operation; and gives effect to those parts of the following instruments of the International Labour Organization that apply to machinery, appliances and equipment that belong to a vessel and are used for loading or unloading the vessel.

DNV-GL Standard for shipboard lifting appliances

This standard provides requirements for certification and verification of lifting appliances intended for load handling within and outside vessel while in the harbor or in sheltered waters and within the vessel while at sea.

ILO 152 REGISTER OF SHIPS’ LIFTING APPLIANCES AND CARGO HANDLING GEAR

Contact us for load test inspection in Australia

Service ports: Brisbane, Gladstone, Newcastle, Sydney, Melbourne, Perth and Fremantle.